fbpx

Kitec Plumbing, Brass fittings and Piping

What is Kitec Plumbing?

Kitec Plumbing Systems consisting of Kitec Brass Fittings and Kitec Pipes are all part of the IPEX family of products. First introduced in the US in 1995, Kitec plumbing was used in new construction until 2007. While Kitec was the most common brand sold under the family of products, additional brands were also used, such as:

  • AmbioComfort
  • AQUA
  • KERR Controls
  • IPEX
  • Plomberie Amelioree
  • PlumbBetter
  • WarmRite
  • XPA

Plumbers consider PEX (polyethylene) piping to be a good plumbing system because it is cheaper than copper, is flexible, and easy to install. Even today, PEX piping (or polyethylene) is still being used in new home construction (various types of PEX exist today). Kitec pipes specifically are made of polyethylene with a thin layer of aluminum (pex-al-pex). The system usually consists of blue and orange flexible piping and brass fittings, however, it was also available in other colors (red, blue, gray and black). In addition to the orange and blue pipes, Kitec plumbing systems can usually be identified by the brass fittings, which will usually have one of the following stamps:

  • Kitec
  • KTC
  • CSA B137.9/10
  • ATSM F1974

Kitec plumbing was used as piping for your drinking water, in under-floor heating systems, and hot water baseboard heaters. 

How is the system pieced together?

The blue pipes carry cold water and the orange pipes carry hot water through a home. The brass fittings were used to join the pipes together.

What are some conditions associated with Kitec Brass Fittings?

Kitec Brass Fitting Meringue
Kitec Brass Fitting Meringue

The primary issue with Kitec plumbing systems lies within the fittings. Kitec brass fittings are made of brass, an alloy comprised of copper and zinc. The problem exists in the tendency for the brass fittings to corrode due to an over abundance of zinc in the brass alloy [30 to 33% – known as “yellow brass”]. When the zinc in Kitec brass fittings are exposed to oxygen and moisture, the corrosion process can commence (dezincification). When this happens, zinc oxide forms blockages in the fittings that result in restricted water flow (meringue), ultimately resulting in breakage and leaks.

Should the fittings or piping fail, they are quite likely to crack, or burst, resulting in flooding. While temperatures and pressure can be regulated to prevent issues with the piping, the brass fittings could still fracture as a result of the dezincification process. For more about the Dezincification process, please visit: https://absoluteid.net/dezincification-yellow-brass-fittings/.

Kitec plumbing systems and its fittings are no longer being manufactured and were the subject of a recall.

Class action lawsuits were filed in Canada and the US. Recalls for the product began in 2005. IPEX (the manufacturer) and its insurer deny that the system is defective, however, agreed to a $125 million settlement. This settlement fund is intended to pay for repairs in homes where the Kitec plumbing systems failed. Claims can be made until the year 2020. Any funds remaining after 2020 will be distributed to those who own homes with Kitec plumbing systems that have not failed.

What are some conditions associated with Kitec Pipes?

Being that Kitec pipes and fittings were used in homes starting in 1995 and the first fitting recalls occurred in 2005, it is suggested that the average life expectancy could potentially be somewhere short of 10 years. However, this life expectancy increases the longer the product is present to the home. The estimated life expectancy of Kitec plumbing systems is 55 years. There are approximately 292,000 installations/properties with the Kitec system in North America.

The most common issues with Kitec Pipes are:

  • Heat. The orange pipes were only certified to run at a maximum temperature of 180 degrees Fahrenheit, but hot water tanks could run hotter than this. Although an unlikely issue for homeowners (from hot water heaters) due to scalding hot temperatures at the the piping highest rating, any presence of higher heat than rated can cause the pipes to deteriorate.
  • Pressure: High water pressure can cause these pipes to fail. 

Additional information regarding Kitec Plumbing Systems

What can you do to maintain your Kitec plumbing?

Some plumbing experts say the question is not IF your Kitec plumbing will leak, but WHEN it will leak. If you have Kitec plumbing in your home, you may want to contact a licensed plumber(s) to take a further examination of the system and regulate/maintain the pressures and temperature until an eventual replacement is performed. Any suggested corrections to the presence of Kitec is recommended to be performed at the advice of a licensed pluming professional and the homeowners discretion.

Will my home insurance cover Water Damage from burst plumbing?

Typically, home insurance policies include coverage for any sudden or accidental escape of water in your home, including ruptured water lines, or overflowing appliances. This is why insurance companies ask what type of plumbing you have in your home. They need to be able to accurately assess the risk in order to charge the right rates and provide you with the right coverage. Sometimes, depending on your plumbing situation, a company may not be able to insure you at all, and you’ll need to shop around, and likely pay a higher rate, if you can find coverage at all.

Don’t let this tempt you into deceiving your insurance broker. Failure to report the presence of Kitec plumbing systems can void your policy when it is discovered. Your best course is to always tell the truth. If you discover that the only solution is to replace your plumbing, the expense can be a lot less than finding out, after a loss, that you have no insurance coverage.

 

Trust the certified professionals at Absolute Inspection Services to perform your home inspection! Contact us today at (888) HME-INSP [463-4677]!

Leave a Comment

Your email address will not be published. Required fields are marked *